Moxa AWK-3121-M12-EU-T Guide d'installation télécharger pdf (Page 2)

- 2 -

Overview

Moxa’s AWK-3121 Access Point/Bridge/AP Client is ideal for applications

that are hard to wire, too expensive to wire, or use mobile equipment that

connects over a TCP/IP network. The AWK-3121 is rated to operate at

temperatures ranging from -25 to 60°C for standard models and -40 to

75°C for extended temperature models, and is rugged enough for any

harsh industrial environment. Installation is easy, with either DIN-Rail

mounting or distribution boxes. The DIN-Rail mounting ability, wide

operating temperature range, and IP30 housing with LED indicators make

the AWK-3121 a convenient yet reliable solution for any industrial

wireless application.

Package Checklist

Moxa’s AWK-3121 is shipped with the following items. If any of these

items is missing or damaged, please contact your customer service

representative for assistance.

• 1 AWK-3121

• 2 Dual-band Omnidirectional Antennas (2dBi, RP-SMA, 2.4&5GHz)

• 1 Quick Installation Guide

• 1 Software CD

• 1 Moxa Product Warranty Booklet

• 1 Cable Holder with a Screw

• 2 Protective Caps

Installation and Configuration

Before installing the AWK-3121, make sure that all items in the Package

Checklist are in the box. In addition, you will need access to a notebook

computer or PC equipped with an Ethernet port. The AWK-3121 has a

default IP address that you must use when connecting to the device for

the first time.

Step 1: Select the power source

The AWK-3121 can be powered by a DC power input or PoE (Power over

Ethernet). The AWK-3121 will use whichever power source you choose.

Step 2: Connect the AWK-3121 to a notebook or PC

Since the AWK-3121 supports MDI/MDI-X auto-sensing, you can use

either a straight-through cable or crossover cable to connect the

AWK-3121 to a computer. If the LED indicator on the AWK-3121’s LAN

port lights up, it means the connection is established.

Step 3: Set up the computer’s IP address

Set an IP address on the same subnet as the AWK-3121. Since the

AWK-3121’s default IP address is 192.168.127.253, and the subnet mask

is 255.255.255.0, you should set the IP address of the computer to

192.168.127.xxx and subnet mask to 255.255.255.0.

1 2 3 4 5 6 7 ... 14 15

Pas de commentaire

Moxa AWK-3121-M12-EU-T Guide d'installation Page 2