Moxa INJ-24 Guide d'installation télécharger pdf (Page 7)

- 7 -

Wiring the INJ-24’s Power Outputs

The two left-most contacts of the 3-contact terminal block connector on

the INJ-24’s top panel are used for 24 VDC output. Top and front views of

one of the terminal block connectors are shown here.

STEP 1:

Insert the negative/positive DC wires into the V-

/V+

terminals.

STEP 2:

To keep the DC wires from pulling loose, use a small

flat-blade screwdriver to tighten the wire-clamp

screws on the front of the terminal block connector.

STEP 3:

Insert the plastic terminal block connector prongs

into the terminal block receptor, which is located on

INJ-24’s top panel.

LED Indicators

Several LED indicators are located on the ING-24’s front panel. The

function of each LED is described in the table below.

LED

Color

State

Description

Power AMBER

Power is being supplied

Off

Power is not being supplied

PoE AMBER On Power is being supplied to a Powered

Device (PD)

Off Power is not being supplied to a Powered

Device (PD)

Specifications

Technology

Standards IEEE802.3, 802.3u, 802.3ab, 802.3af, 802.3at

Interface

RJ45 Ports 10/100/1000BaseT(X) speed

LED Indicators Power, PoE

Power

Input Voltage 24/48 VDC (20 to 60 VDC)

Input Current Max. 1.3 A (@ 24 VDC)

Connection Removable 3-pin terminal block

Overload Current

Protection

1.6 A

Reverse Polarity

Protection

Present

PoE (per port)

Maximum Output Power 30 W

Mechanical

Housing IP30 protection, plastic case

Dimensions 25 × 109 × 88 mm (0.98 x 4.29 x 3.46 in)

Weight 115 g

Installation DIN-Rail, wall mounting

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Moxa INJ-24 Guide d'installation Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Extensions du réseau Moxa INJ-24