Moxa AWK-1121 Guide d'installation télécharger pdf (Page 2)

- 2 -

Overview

Moxa’s AWK-1121 WLAN Client is ideal for applications that are hard to

wire, too expensive to wire, or use mobile equipment that connects over

a TCP/IP network. The AWK-1121 is rated to operate at temperatures

ranging from 0 to 60°C for standard models and -40 to 75°C for extended

temperature models, and is rugged enough for any harsh industrial

environment. Installation is easy, with either DIN-Rail mounting or

distribution boxes. The DIN-Rail mounting ability, wide operating

temperature range, and IP30 housing with LED indicators make the

AWK-1121 a convenient yet reliable solution for any industrial wireless

application.

Package Checklist

Moxa’s AWK-1121 is shipped with the following items. If any of these

items is missing or damaged, please contact your customer service

representative for assistance.

• 1 AWK-1121

• 1 Swivel-type Antenna (2dBi, RP-SMA, 2.4&5GHz)

• 1 Quick Installation Guide

• 1 Software CD

• 1 Moxa Product Warranty Booklet

• 1 Protective Cap

Installation and Configuration

Before installing the AWK-1121, make sure that all items in the Package

Checklist are in the box. In addition, you will need access to a notebook

computer or PC equipped with an Ethernet port. The AWK-1121 has a

default IP address that you must use when connecting to the device for

the first time.

Step 1: Select the power source

The AWK-1121 is powered by a DC power input, while the AWK-1121-PoE

can also be powered by PoE (Power over Ethernet). The AWK-1121-PoE

will use whichever power source you choose.

Step 2: Connect the AWK-1121 to a notebook or PC

Since the AWK-1121 supports MDI/MDI-X auto-sensing, you can use

either a straight-through cable or crossover cable to connect the

AWK-1121 to a computer. If the LED indicator on the AWK-1121’s LAN

port lights up, it means the connection is established.

Step 3: Set up the computer’s IP address

Set an IP address on the same subnet as the AWK-1121. Since the

AWK-1121’s default IP address is 192.168.127.253, and the subnet mask

is 255.255.255.0, you should set the IP address of the computer to

192.168.127.xxx and subnet mask to 255.255.255.0.

1 2 3 4 5 6 7 ... 11 12

Pas de commentaire

Moxa AWK-1121 Guide d'installation Page 2