Moxa ONCELL G2110-T Manuel d'utilisateur télécharger pdf (Page 93)

OnCell G2100 Series User’s Manual GPRS Connection

7-8

Modem Diagnostics

The following instructions explain how to verify that the modem is installed properly and has been

activated.

1. From the Control Panel, open Phone and Modem Options. On the Modem tab, click

Properties.

ATTENTION

Make sure that the RS-232 port of the OnCell G2100 Series modem is connected. For the OnCell

G2150I, make sure DIP switch 1 is set to ON.

Make sure the SMS Tunnel Mode is disabled. If the GSM LED is blinking, that means that SMS

Tunnel Mode is enabled and activated. To switch back to Command Mode, you must send the

escape command (+++) using terminal software, or remove the SIM card directly.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 104 105

Pas de commentaire

Moxa ONCELL G2110-T Manuel d'utilisateur Page 93