Moxa IMC-21A-M-SC Guide d'installation télécharger pdf (Page 8)

- 8 -

DIP Switch Settings

DIP

No.

Function ON OFF

Force Fiber Port

Duplex

Full Duplex* Half Duplex

“

ON”: Forces Full Duplex on Fiber port.

“OFF”: Forces Half Duplex on Fiber port.

Link Fault Pass

Through

Enable* Disable

“

ON”: Enables “Link Fault Pass Through”, the link

status on the TX port will inform the FX port of the

same device and vice versa.

“OFF”: Disables “Link Fault Pass Through”, the

link status on the TX port will not inform the FX

port.

Force TP Duplex

Full Duplex*

Half Duplex

(Only when Auto Negotiation (DIP 5) is disabled)

“ON”: Forces Full Duplex on Ethernet port.

“OFF”: Forces Half Duplex on Ethernet port.

Force TP Speed

100Mbps*

10Mbps

(Only when Auto Negotiation (DIP 5) is disabled)

“ON”: Forces 100Mbps on Ethernet port.

“

OFF”: Forces 10Mbps on Ethernet port.

Auto Negotiation

Enable*

Disable

“

ON”: Enables “Auto Negotiation” function, the

speed and duplex states for each port link segment

are automatically configured using the highest

performance interoperation mode.

“ OFF”: Disables “Auto Negotiation” function, the

speed and duplex states depend on the DIP 3 & 4

configuration.

*Default setting

After changing the DIP switch setting, you will need to power off and then

power on the IMC-21A, or use a pointed object to hold the reset button

down for five seconds to activate the new setting.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Moxa IMC-21A-M-SC Guide d'installation Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Convertisseurs de médias en réseau Moxa IMC-21A-M-SC