
- 10 -
LED Indicators
The front panel of the Moxa AWK-1121 contains several LED indicators.
The function of each LED is described in the table below.
PWR Green
Power is not being supplied
FAULT Red
(slow)
IP address cannot be got from DHCP
server (interval: 1 sec).
IP address conflict (interval: 0.5 sec).
STATE
Green/
Red
The AWK Search Utility has located the
AWK. (interval: 1sec).
Booting or Error condition.
Green
WLAN
Green
WLAN’s data communication is run
Off
WLAN is not in use or not working
properly.
LAN
Green
Data is being transmitted
Specifications
Standards IEEE 802.11a/b/g for Wireless LAN
IEEE 802.3u 10/100BaseT(X) for Ethernet LAN
IEEE 802.3af for Power-over-Ethernet (PoE
models Only)
IEEE 802.1D/w STP/RSTP
Spread Spectrum and
Modulation
DSSS with DBPSK, DQPSK, CCK
OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Range 2.412 to 2.484 GHz
64-bit and 128-bit WEP encryption, WPA /WPA2
(IEEE 802.1X/ RADIUS, TKIP and AES)
Transmission Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Protocol
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, RTP
TX Transmit Power (for hardware revision 1.2)
802.11b:
±
802.11g:
±
1.5 dBm @ 6 to 24 Mbps, Typ. 1
±
dBm @ 36 Mbps,
Typ. 16±1.5 dBm @ 48 Mbps, Typ. 16±
54 Mbps
802.11a: Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5
dBm @ 36 Mbps, Typ. 15±1.5 dBm @ 48 Mbps,
Commentaires sur ces manuels