- 12 -
LED Color State Description
Blinking
IP address conflict (interval: 0.5 sec)
Error condition does not exist.
STATE Green/Red
Green,
blinking
The AWK has been located by AWK
Search Utility. (interval: 1sec)
Red Booting or Error condition
WLAN Green/
Amber
Green, on WLAN functions in Client mode.
Green,
WLAN’s data communication is run in
WLAN functions in AP/Bridge mode.
Amber,
blinking
WLAN’s data communication is run in
AP/Bridge mode
Off WLAN is not in use or not working
LAN Amber/
Green
LAN port’s 10/100Mbps link is active.
Amber,
blinking
Data is being transmitted at 10/100
Mbps
Amber, off LAN port’s 10/100Mbps link is inactive.
Green, on LAN port’s 1000Mbps link is active.
Green,
Data is being transmitted at 1000 Mbps
LAN port’s 1000Mbps link is inactive.
Specifications
WLAN Interface
Standards: IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q VLAN
Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @
36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 bps to BPSK @ 6.5 Mbps
(multiple rates supported)
Operating Channels
(central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
Commentaires sur ces manuels