Moxa AWK-4131-M12-EU-T Guide d'installation

 2010 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. P/N: 1802041310010 AWK-4131 Hardware Installation Gu

- 10 - Communication Connections Connecting the Data Lines 10/100/1000BaseT(X) Ethernet Port Connection AWK-4131 has 10/100/1000BaseT(X) Ethernet por

- 11 - Installation 1. Refer to the pin assignment and solder wires with ; 2. Then assemble , , , and  in order; 3. Test the plug to ensure

- 12 - LED Color State Description Blinking (fast) IP address conflict (interval: 0.5 sec) Off Error condition does not exist. STATE Green/Red Gr

- 13 - 5.18 to 5.24 GHz (4 channels for W52) Security: • SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit

- 14 - LAN Ports: 1, 10/100/1000BaseT(X), auto negotiation speed (M12 female type) Fiber Ports: 1, 1000BaseSFP slot Console Port: RS-232 (waterproo

- 2 - Notes for the Reader WARNING Indicates that death or personal injury may occur if proper precautions are not taken. ATTENTION Indicates tha

- 3 - • SFP-1GLXLC-T: Small form factor pluggable transceiver with 1000BaseLX, LC, 10 km, -40 to 85°C • SFP-1GLHLC: Small form factor pluggable tra

- 4 - NOTE To make the change effective, you must save the change and then click Restart  Save and Restart button to apply all changes. Panel Layo

- 5 - Dimensions (unit = mm) Attaching Antennas The AWK-4131 inclues two dual-band omni-directional antenna by default. Attach the antennas as illus

- 6 - STEP 1: Attach the wall-mounting kit with M4 screws, as shown in the diagram below. STEP 2: Mounting the AWK-4131 on the wall requires 4 screw

- 7 - DIN-Rail Mounting (Optional) The DK-DC50131 die-cast metal kit can be bought separately, and enable easy and robust installation for the AWK-4

- 8 - Wiring Requirements WARNING Safety First! Be sure to disconnect the power cord before installing and/or wiring your Moxa AWK-4131. Calculate

- 9 - ATTENTION This product is intended to be supplied by a Listed Power Unit marked “Class 2” or “LPS” and rated O/P: 12 to 48 VDC, minimum 6 W (1